Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in Dorchester?
Spring repair in Dorchester typically runs $180 – $340 per spring, and most garages need both springs replaced at once, which puts a matched pair at about $360 – $680. That price covers the spring itself, the labor to safely unwind and re-tension a torsion or extension system, and a balance check on the door. We give free estimates, so you get a written number before any work starts.
Torsion springs are the part of a garage door that most professionals treat with respect. A wound torsion spring holds serious stored force, and if it lets go it can injure anyone in the way. That’s why we handle spring replacement directly rather than handing it off. Our technicians have up to 12 years of experience on the eight brands that fill most Dorchester garages: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor.
Key Takeaways
- One spring: typically $180 – $340. A matched pair: about twice that, $360 – $680.
- Prices are per job, set by the written estimate before we begin.
- Most two-spring doors get both springs changed together, since a partner spring of the same age usually fails soon after.
- Spring work is safety-critical. We don’t recommend doing it yourself, and we don’t publish steps that could get someone hurt.
- We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Spring Replacement Cost Breakdown (2026)
Here’s how spring work usually breaks down for a Dorchester garage. These are typical estimated ranges, not a final quote. The written estimate you get on site sets the price.
| Item | Typical Estimated Range |
|---|---|
| Single torsion or extension spring replacement (labor and spring) | $180 – $340 |
| Matched pair of springs | $360 – $680 |
| Cable repair (often done alongside springs) | $130 – $250 |
| Roller replacement (worn rollers wear springs faster) | $110 – $220 |
| Track realignment | $120 – $240 |
| Panel replacement if a spring failure damaged the door | $250 – $500 |
| Opener repair if the motor was strained by a broken spring | $120 – $320 |
Why the spread? A single extension spring on a lighter one-car door sits at the low end. A torsion conversion, a heavier double door, or a garage where the cables and drums need attention at the same time pushes toward the top. The most common surprise cost is a stretched or frayed cable found during the spring job. Cables and springs wear together, and replacing one without checking the other usually means a second visit.
If your door has stopped opening altogether, that often points to more than one part. Our garage door repair Dorchester service covers the full system, so a spring job can turn into a proper fix rather than a patch.
What Affects Spring Replacement Pricing in Dorchester
- One spring or two. This is the biggest single factor. A door with a single torsion or extension spring costs about half what a two-spring door does. If one of a matched pair breaks, replacing both is usually the smarter spend, because the second spring is the same age and under the same load.
- Torsion versus extension. Torsion springs sit on a shaft above the door and need careful winding and a proper wind count. Extension springs stretch along the tracks and use safety cables. Torsion work takes more setup and more care, which shows up in the labor half of the price.
- Door weight and size. A wide double-car door in a Dorchester two-family or triple-decker carries heavier springs than a single-car door, and heavier springs cost more. Insulated doors add weight too.
- Condition of the cables, drums, and rollers. If the cables are frayed or the drums are chewed up, we won’t safely re-tension new springs onto tired hardware. Catching these at the same visit saves a second call-out.
- Access and headroom. A low-clearance garage, a tight ceiling, or a door that’s been boxed in by shelving adds time. Dorchester’s older housing stock includes plenty of garages where the spring assembly is cramped and awkward to reach.
- Age of the rest of the system. A spring rarely fails in isolation on an older door. If the opener has been straining against a dragging door for months, the motor bearings take the wear, so a spring visit sometimes turns up an opener problem worth pricing at the same time.
One place-specific note: Boston’s freeze-and-thaw cycles through winter put real stress on garage hardware. When temperatures swing, metal contracts and expands, and springs on a cold, unheated Dorchester garage work harder in January than they do in June. That’s a general pattern, not a scare story. It does mean a spring that’s been “about to go” for a while tends to let go in the cold.
How to Save on Spring Replacement
Spring work has a real safety floor, so we’re not going to hand you a list of shortcuts that put you under a live torsion spring. The savings come from timing and from bundling the right things, not from cutting corners.
- Replace the pair. If one of a matched pair breaks, doing both at once costs less than two separate visits. The second spring is the same age and the same load history, so it’s a matter of when, not if.
- Bundle the wear items. Rollers, cables, and the balance check are quick to add while the door is already apart. Paying for them now beats paying a separate call-out later.
- Get a written estimate up front. Free estimates mean you can compare the spring price, the cable price, and any extras side by side before you commit. We put the number in writing.
- Don’t wait for the second spring. A door running on one tired spring drags, strains the opener, and wears the tracks. Catching it early keeps the repair small.
- Ask about parts if you’re handy with the low-risk pieces. If you only need a roller or a bracket, we supply parts on their own. Need the part, not the full repair? We supply that too. Just leave the springs and cables to a trained technician.
To get a free estimate on your door, call (855) 500-4346. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday.
Repair or Replace? A Quick Way to Decide
A single spring replacement on a sound door is almost always the right call. The question gets more interesting on an older door. If the spring is the only problem and the panels, tracks, and opener are in decent shape, you’re looking at a $180 – $340 repair per spring and you’re done.
If the spring failure came with bent tracks, cracked panels, or a strained opener, add those line items up before you decide. Spring work plus cable plus panel can climb toward the middle of our new door range of $700 – $2200. When the combined repair approaches that, a new door starts to make sense. It’s worth seeing both numbers side by side, which is exactly what a free estimate gives you.
Property managers across Dorchester’s multi-family buildings tend to think about this differently: a spring that fails on a shared garage door means every tenant is stuck. Getting a matched pair replaced before it fails is usually cheaper than an emergency call on a cold morning. Our spring replacement service handles both planned and urgent work.
What Happens When You Call
We ask about the door first: brand, size, whether it’s torsion or extension, and what the door is doing right now. That tells us which springs and hardware to expect. We work on LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor systems, so there’s a good chance we already know your setup before we arrive.
On site, we confirm the diagnosis, check the cables and rollers, and give you a written estimate. You approve it before any work starts. Then we replace the springs, re-balance the door, and test the safety reverse. One call covers both the door and the opener, so if the motor took a beating from a dragging door, we can flag it at the same time rather than leaving you with a fresh problem next week.
We answer 24/7. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. We’re closed Saturday. Sunday work is available.
Safety: Why Spring Work Belongs to a Technician
Torsion springs store energy that’s released in an instant when the spring fails or is mishandled. The winding bars used to tension them can spin free with enough force to break a wrist or worse, and a door that drops while someone is underneath it is a serious hazard. Extension springs carry their own risk if a safety cable isn’t in place.
That’s why we don’t publish step-by-step instructions for replacing springs. What you can safely do is check the door: look for a visible gap in a torsion spring, listen for a bang, watch for a door that opens a few inches and stops, or notice a door that feels suddenly very heavy. Any of those point to a spring. Call us and let a trained technician handle it. Our technicians have up to 12 years of experience on these exact components, and the local pros we connect you with are licensed and insured as their state requires.
FAQs – Spring Replacement Cost
How much does it cost to replace a garage door spring in Dorchester?
Expect $180 – $340 for one spring and roughly $360 – $680 for a matched pair, which is what most Dorchester garages need. The written estimate fixes the final price. Call (855) 500-4346 for a free estimate.
Can you replace just one spring instead of both?
Yes, we can, but on a two-spring door it usually costs more over time. A partner spring of the same age is on borrowed time, so replacing it separately means a second visit at the full single-spring price. Doing the pair together is the cheaper path overall.
Is it cheaper to repair the spring or replace the whole door?
Spring repair is far cheaper when the door itself is sound: $180 – $340 per spring versus $700 – $2200 for a new door installation. If a spring failure also bent tracks or cracked panels, add those costs up first. When the repair total nears the low end of a new door, replacing starts to make sense. Call (855) 500-4346 and we’ll price both.
How much does a broken cable cost if it’s found during spring replacement?
Cable repair typically runs $130 – $250. Cables and springs wear at the same rate, so we check them during every spring job. Catching a frayed cable at the same visit saves a separate call-out later.
Can you come out the same day my spring breaks?
Often, yes. We dispatch Sunday through Friday, 7am to 7pm, and same-day service is available when the schedule allows. Call (855) 500-4346 to check availability for your door. We answer 24/7, and a call outside dispatch hours gets booked into the next opening.
Getting a Straight Answer on Your Spring
A broken spring isn’t a job to guess at or patch with a generalist who’s never tensioned a torsion system. Garage doors only – that’s the whole job for us, and spring replacement is a core capability, not an upsell. Whether you need a single spring, a matched pair, or just the right part, we’ll tell you what’s involved and put the price in writing before we touch the door.
Call (855) 500-4346 for a free estimate. We answer 24/7. Fast dispatch, 7am-7pm, Sunday through Friday.
Pricing reflects the Dorchester market as of 2026. Garage Door Repair Dorchester offers free estimates – call (855) 500-4346.
Written by the team at Garage Door Repair Dorchester.
What Our Customers Say
"Spring snapped at six in the morning with my car sealed inside and me due at work. Somebody was here by eight thirty and had it fixed that morning. Door's quieter now than it was before it broke."
- Jennifer Hoffman"Replaced the bottom panel after I backed into it. Color match is close enough that you have to know to look for it."
- Kevin Mercer"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
- Emily Whitaker